what wood for boat transom
An aluminum jon boat with a wood transom that needs replacement means possibilities, such as making the transom taller to accommodate a long-shaft outboard. whatever your choices, the end result needs to fit well, be properly finished and securely attached to the aluminum hull. whether the wood transom on your. The motor mount or transom is what supports the engine. older transoms were not a long as newer ones and most had a piece of 1 1/4” wood to support the engine. twenty years ago most manufacturers switched to all aluminum transoms. the piece of wood was replaced with a thick piece of aluminum to support the engine.. Boat building factories use either vacuum bagging or enormous clamps to press the transom core in the hull. there is no need to fabricate those clamps. you probably have number of holes in your transom: scuppers, motor well drain, holes for trim tabs etc. if you don't have enough holes in the transom, drill some, they are easy to fill later..
what wood for boat transom I replaced my old boats transom last year. i bought marine grade, expensive, but the boat was in pretty decent shape and wanted to do it right. i got a 2 part epoxy and gave it 2-3 coats. the new owner should never have an issue with it for the life of that boat.. The transom angle is the vertical incline of the transom and is measured in degrees. the boat transom can be flat with zero degree angles. or it can have an angle degree as high as 30. the average transom angle is around 14 degrees. boat transom angles play a pivotal role in the flexibility of the boats trimming abilities..
Comments
Post a Comment